Step 4 - Lock out equipment. Locks and tags shall be applied to isolate each power source to prevent the operation of the equipment controls. One lock and tag shall be applied to each point of protect; Ref - AFMAN 91-203 21.4.2.4.1 4.1.4.1 Locks installed on energy isolation devices shall be color-coded red to allow easy recognition throughout lockout device is removed. Written Procedures: explains the correct way to safely turn off a piece of equipment or a system before checking it. A good written procedure should at least include: • what the procedure is for, • specific steps to shut down, block, or isolate the energy sources, • how to use and then remove the lockout/ tagout Clamps for High-Polish MetalQuick-Clamp Sanitary Tube Fittings. Connect quick-clamp sanitary tube fittings— also known as aseptic fittings— for a fast and easy way to access your line. Choose from our selection of no-hole circuit breaker lockouts, electrical plug lockouts, circuit breaker lockouts, and more. In stock and ready to ship. A lockout/tagout procedure should include the following 6 steps: Preparation -The authorized employee (person performing the service/maintenance) must investigate and have complete understanding of all types of hazardous energy that must be controlled on a machine or piece of equipment. It is important that they identify the specific hazards The basics of lockout/tagout for crane workers. Lockout/tagout policies and procedures protect workers from hazardous energy during overhead crane repair and other machine and equipment service. The intention of lockout/tagout is to lockout and dissipate all energy sources—and verify a zero-energy state—before maintenance work can begin. This program is a great tool for training affected and authorized employees in lockout/tagout procedures. This includes workers in kitchens, laundry rooms and maintenance. Topics include authorized and affected associates, the sequence of steps in a lockout procedure, the annual inspection process, lockout hardware and the one exception to the A Guide To Lockout Tagout Requirements. by emedco 12/07/2023. Lockout/tagout (LOTO) procedures play a pivotal role in safeguarding workers during equipment maintenance and servicing, preventing accidents and injuries. In this article, we expand on the comprehensive requirements for lockout/tagout procedures, with a focus on ensuring compliance Lockout/tagout procedures should be machine specific. That is, a specific lockout/tagout procedure should be developed for each individual piece of equipment. The procedure should identify the following machine-specific information including description of machine, location, energy sources and methods of controlling those sources. Without question, detailed and written lockout procedures are a must for any group lockout system. That means a consistent, applicable control method must be understood and used. If two workers disagree on the correct method to secure a specific machine, it means one is wrong or both are. Develop, document and utilize lockout/tagout procedures. Provide employees appropriate training. Provide, at no cost to employees, equipment required by the lockout/tagout procedures. Continuing competency through training. 1. Introduction 2. Employer Responsibility 3zfWzw.